{"title":"Steering Stabilizer","description":null,"products":[{"product_id":"17-23-ford-superduty-ats-stabilizer-8-1-inch-trav-22-19-inch-ext-through-shaft-1-1-8-inch-clamp-fox-offroad-shocks","title":"17-23 Ford Superduty ATS Stabilizer 8.1 Inch Trav  22.19 Inch Ext Through-Shaft 1-1\/8 Inch Clamp Fox Offroad Shocks","description":"\u003cp\u003eWith conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the Shaft occupies more volume in the Body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state.\u003c\/p\u003e\u003cp\u003eTo overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.\u003c\/p\u003e\u003cp\u003eThe Factory Race Series 2.0 Stabilizer ATS utilizes an Adjustable Through Shaft (ATS) architecture that eliminates Shaft fluid displacement throughout the stabilizer's entire Travel in both directions. The external piggyback Reservoir provides additional fluid capacity and utilizes an Internal Floating Piston (IFP) to separate the fluid from the nitrogen gas charge to eliminate cavitation.\u003c\/p\u003e\u003cp\u003eFor increased control that can be tailored to any driving style and setup, an external adjuster provides 24 clicks of adjustment to fine tune the feel. The result is highly customizable and consistent damping of unwanted steering feedback in a single, bolt-on stabilizer.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e983-02-143\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThrough Shaft Stabilizer, Performance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 8.11\u003c\/li\u003e\n\u003cli\u003eBody 2.0 Inch impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 5\/8 Inch hard chrome plated heat treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 22.19\u003c\/li\u003e\n\u003cli\u003eCompressed Length 14.09\u003c\/li\u003e\n\u003cli\u003eTop Mount Tie Rod Clamp\u003c\/li\u003e\n\u003cli\u003eBottom Mount Eyelet\u003c\/li\u003e\n\u003cli\u003eFitment Notes Requires Drop Bracket for greater than 1.5 Inch lift\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242614321194,"sku":"BKTK_983-02-143","price":524.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/FOX98302143-BKTK.png?v=1775588154"},{"product_id":"17-23-ford-f-250-f-350-superduty-stabilizer-2-0-8-1-inch-through-shaft-1-1-8-inch-tie-rod-fox-offroad-shocks","title":"17-23 Ford  F-250\/F-350 Superduty Stabilizer 2.0 8.1 Inch Through-Shaft 1-1\/8 Inch Tie Rod Fox Offroad Shocks","description":"\u003cp\u003eWith conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the Shaft occupies more volume in the Body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state.\u003c\/p\u003e\u003cp\u003eTo overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.\u003c\/p\u003e\u003cp\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates Shaft fluid displacement throughout the stabilizer's entire Travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback.\u003c\/p\u003e\u003cp\u003eThe result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.\u003c\/p\u003e\u003cp\u003eThe Performance Series 2.0 Stabilizer TS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e985-02-132\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThrough Shaft Stabilizer, Performance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 8.1\u003c\/li\u003e\n\u003cli\u003eBody 2.0 Inch impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 5\/8 Inch hard chrome plated heat treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 23.17\u003c\/li\u003e\n\u003cli\u003eCompressed Length 15.08\u003c\/li\u003e\n\u003cli\u003eTop Mount Tie Rod Clamp\u003c\/li\u003e\n\u003cli\u003eBottom Mount Eyelet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003eRequires drop bracket for greater than 1.5 Inch lift\u003c\/p\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242616156202,"sku":"BKTK_985-02-132","price":375.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/28168628928554-FOX98502132-BKTK.png?v=1776129859"},{"product_id":"14-24-ram-2500-3500-ats-stabilizer-8-2-inch-travel-23-3-inch-ext-throughshaft-axle-mount-fox-offroad-shocks","title":"14-24 Ram 2500\/3500 ATS Stabilizer 8.2 Inch Travel 23.3 Inch Ext ThroughShaft Axle Mount Fox Offroad Shocks","description":"\u003cp\u003eWith conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the Shaft occupies more volume in the Body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state.\u003c\/p\u003e\u003cp\u003eTo overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.\u003c\/p\u003e\u003cp\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates Shaft fluid displacement throughout the stabilizer's entire Travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback.\u003c\/p\u003e\u003cp\u003eThe result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.\u003c\/p\u003e\u003cp\u003eThe Performance Series 2.0 Stabilizer TS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e983-02-158\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThrough Shaft Stabilizer, Performance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 8.2\u003c\/li\u003e\n\u003cli\u003eBody 2.0 Inch impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 5\/8 Inch hard chrome plated heat treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 23.27\u003c\/li\u003e\n\u003cli\u003eCompressed Length 15.07\u003c\/li\u003e\n\u003cli\u003eTop Mount Axle Mount\u003c\/li\u003e\n\u003cli\u003eBottom Mount Eyelet\u003c\/li\u003e\n\u003cli\u003eFitment Notes Axle Mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242617696298,"sku":"BKTK_983-02-158","price":524.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/FOX98302158-BKTK.png?v=1775588348"},{"product_id":"14-24-ram-2500-3500-ts-stabilizer-8-2-inch-trav-23-3-inch-ext-through-shaft-axle-mount-fox-offroad-shocks","title":"14-24 Ram 2500\/3500 TS Stabilizer 8.2 Inch Trav 23.3 Inch Ext Through-Shaft Axle Mount Fox Offroad Shocks","description":"\u003cp\u003eWith conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the Shaft occupies more volume in the Body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state.\u003c\/p\u003e\u003cp\u003eTo overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.\u003c\/p\u003e\u003cp\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates Shaft fluid displacement throughout the stabilizer's entire Travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback.\u003c\/p\u003e\u003cp\u003eThe result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.\u003c\/p\u003e\u003cp\u003eThe Performance Series 2.0 Stabilizer TS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e985-02-135\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThrough Shaft Stabilizer, Performance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 8.1\u003c\/li\u003e\n\u003cli\u003eBody 2.0 Inch impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 5\/8 Inch hard chrome plated heat treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 23.17\u003c\/li\u003e\n\u003cli\u003eCompressed Length 15.08\u003c\/li\u003e\n\u003cli\u003eTop Mount Axle Mount\u003c\/li\u003e\n\u003cli\u003eBottom Mount Eyelet\u003c\/li\u003e\n\u003cli\u003eFitment Notes Axle Mount\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242617958442,"sku":"BKTK_985-02-135","price":375.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/28168634564650-FOX98502135-BKTK.png?v=1776129735"},{"product_id":"08-up-ford-f-250-f-350-superduty-steering-stabilizer-performance-series-2-0-internal-floating-piston-10-6-inch-fox-offroad-shocks","title":"08-Up Ford F-250\/F-350 Superduty Steering Stabilizer Performance Series 2.0 Internal Floating Piston 10.6 Inch Fox Offroad Shocks","description":"\u003cp\u003eThe Performance Series 2.0 IFP steering stabilizer helps take the load off your steering Components and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction.\u003c\/p\u003e\u003cp\u003eThe large knobs and open tread pattern can cause your front end to wander on or off the road.\u003c\/p\u003e\u003cp\u003eThe Performance Series 2.0 IFP stabilizer uses the same advanced damping technology contained in our Performance Series shocks to tame steering feedback from even the most aggressive tires.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e985-24-001\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePerformance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 10.62\u003c\/li\u003e\n\u003cli\u003eBody 2.0 inch Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 1\/2 Inch hard chrome plated heat-treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 28.52\u003c\/li\u003e\n\u003cli\u003eCompressed Length 17.9\u003c\/li\u003e\n\u003cli\u003eTop Mount Eyelet\u003c\/li\u003e\n\u003cli\u003eBottom Mount ES5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242630574122,"sku":"BKTK_985-24-001","price":251.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/28168674148394-FOX98524001-BKTK.png?v=1776129501"},{"product_id":"2008-2012-dodge-2500-3500-ats-stabilizer-2-0-ps-8-1-inch-1-5-8-inch-clamp-fox-offroad-shocks","title":"2008-2012 Dodge 2500\/3500 ATS Stabilizer 2.0 PS 8.1 Inch 1-5\/8 Inch Clamp Fox Offroad Shocks","description":"\u003cp\u003eWith conventional steering stabilizers, turning in one direction creates an increase in pressure inside the stabilizer as the Shaft occupies more volume in the Body and displaces the oil. The repercussion is a push or pull steering force felt by the driver as the stabilizer attempts to return to its neutral state.\u003c\/p\u003e\u003cp\u003eTo overcome this unidirectional force, dual opposing stabilizers are often used, but this requires additional mounting hardware and space.\u003c\/p\u003e\u003cp\u003eDerived from the FOX's original ATS stabilizer, the Performance Series 2.0 Stabilizer TS utilizes a Through Shaft (TS) architecture that eliminates Shaft fluid displacement throughout the stabilizer's entire Travel in both directions. By eliminating fluid displacement, the TS design delivers neutral and consistent damping of unwanted steering feedback.\u003c\/p\u003e\u003cp\u003eThe result is unrivaled steering control at an unbelievable price point in a single, bolt-on stabilizer.\u003c\/p\u003e\u003cp\u003eThe Performance Series 2.0 Stabilizer TS includes application specific mounting hardware and is available in multiple clamp sizes for stock or aftermarket heavy duty tie-rods.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e983-02-147\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThrough Shaft Stabilizer, Performance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, Eliminates fluid displacement, delivering neutral and consistent damping of unwanted steering feedback, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 8.11\u003c\/li\u003e\n\u003cli\u003eBody 2.0 Inch impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 5\/8 Inch hard chrome plated heat treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 22.18\u003c\/li\u003e\n\u003cli\u003eCompressed Length 14.07\u003c\/li\u003e\n\u003cli\u003eTop Mount Tie Rod Clamp\u003c\/li\u003e\n\u003cli\u003eBottom Mount Eyelet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242632736810,"sku":"BKTK_983-02-147","price":524.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/FOX98302147-BKTK.png?v=1775589055"},{"product_id":"08-22-dodge-ram-2500-3500-steering-stabilizer-1-2-inchshaft-performance-series-2-0-internal-floating-piston-8-6-inch-fox-offroad-shocks","title":"08-22 Dodge RAM 2500\/3500 Steering Stabilizer 1\/2 InchShaft Performance Series 2.0 Internal Floating Piston 8.6 Inch Fox Offroad Shocks","description":"\u003cp\u003eThe Performance Series 2.0 IFP steering stabilizer helps take the load off your steering Components and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction.\u003c\/p\u003e\u003cp\u003eThe large knobs and open tread pattern can cause your front end to wander on or off the road.\u003c\/p\u003e\u003cp\u003eThe Performance Series 2.0 IFP stabilizer uses the same advanced damping technology contained in our Performance Series shocks to tame steering feedback from even the most aggressive tires.\u003c\/p\u003e\u003cp\u003ePart Number\u003cbr\u003e985-24-170\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePerformance Tuned For Vehicle Specific Application, Aluminum Body Dissipates Heat Faster Than Steel, IFP Separates Oil From High-Pressure Nitrogen Gas, Black Anodized CNC Machined Aluminum Components\u003c\/li\u003e\n\u003cli\u003eSeries Performance\u003c\/li\u003e\n\u003cli\u003eTravel 78.65\u003c\/li\u003e\n\u003cli\u003eBody 2.0 inch Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece Body resists rust over time\u003c\/li\u003e\n\u003cli\u003eBody Plating Clear-anodized for a durable finish\u003c\/li\u003e\n\u003cli\u003eComponents Black-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eShaft 1\/2 Inch hard chrome plated heat-treated alloy steel\u003c\/li\u003e\n\u003cli\u003ePiston Race-developed high-flow Piston design\u003c\/li\u003e\n\u003cli\u003eValving Application specific Valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eSeals Redundant sealing pack system main seal, wiper seal, scraper seal\u003c\/li\u003e\n\u003cli\u003eExtended Length 24.25\u003c\/li\u003e\n\u003cli\u003eCompressed Length 15.6\u003c\/li\u003e\n\u003cli\u003eTop Mount ES2\u003c\/li\u003e\n\u003cli\u003eBottom Mount ES2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOX Offroad Shocks","offers":[{"title":"Default Title","offer_id":44242633916458,"sku":"BKTK_985-24-170","price":229.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/28168688631850-FOX98524170-BKTK.png?v=1776129491"},{"product_id":"09-up-ram-hd-steering-stabilizer-icon-vehicle-dynamics","title":"09-Up RAM HD Steering Stabilizer Icon Vehicle Dynamics","description":"\u003cp\u003eThis stabilizer is based on the ICON 2.0 Aluminum Series shock absorber line, and has been specifically tuned to compensate for the additional weight of larger wheels and tires on the RAM 3\/4-ton trucks. The ICON 2.0 stabilizer is a direct fit replacement, meaning install is as simple as removing the original unit, and bolting up the ICON part in its place.\u003c\/p\u003e\u003cp\u003eEase of installation combined with Increased damping ability over stock, a corrosion-resistant shock body, and a fully rebuildable design make the ICON steering stabilizer the best choice for replacing or upgrading worn out 2009-UP RAM 2500\/3500 components.\u003c\/p\u003e\u003cb\u003eFeatures and Benefits:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003ePremium Grade 5WT Shock Oil for consistent damping characteristics\u003c\/li\u003e\n\u003cli\u003eNitrogen charged monotube design with internal reservoir\u003c\/li\u003e\n\u003cli\u003eInternal floating piston design eliminates dead zone typical in emulsion shocks\u003c\/li\u003e\n\u003cli\u003e6063 Anodized aluminum body for superb heat dissipation, excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003e6061 aluminum rod end and internals insure strength and durability\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings and zinc plated sleeves for OE factory type fitment\u003c\/li\u003e\n\u003cli\u003e5\/8 Inch Chrome Plated, Hardened Steel Shaft resists corrosion and pits\u003c\/li\u003e\n\u003cli\u003e100 Percent Rebuildable\u003c\/li\u003e\n\u003cli\u003e100 Percent Revalveable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eColor: Light Grey\u003c\/li\u003e\n\u003cli\u003eAdjustable Damping: No\u003c\/li\u003e\n\u003cli\u003eCompressed Length: 14.93\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: 2.0\u003c\/li\u003e\n\u003cli\u003eCylinder Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eDamping Type: Oil\u003c\/li\u003e\n\u003cli\u003eExtended Length: 24.12\u003c\/li\u003e\n\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\n\u003cli\u003eLower Mount Type: Eyelet\u003c\/li\u003e\n\u003cli\u003eMounting Bracket Included: No\u003c\/li\u003e\n\u003cli\u003eService Parts: 202002 - 2.0 Ifp Rebuild Kit\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: 0.625\u003c\/li\u003e\n\u003cli\u003eShaft Material: Chrome\u003c\/li\u003e\n\u003cli\u003eShock Travel Length: 9.2\u003c\/li\u003e\n\u003cli\u003eSteering Stabilizer Configuration: Single\u003c\/li\u003e\n\u003cli\u003eUpper Mount Type: Eyelet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44282490748970,"sku":"FRDK_216520","price":195.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/216520-FRDK.jpg?v=1776963522"},{"product_id":"1999-2025-ford-f-250-f-350-super-duty-v-s-2-0-aluminum-series-steering-stabilizer-shock-dual-opposing-icon-vehicle-dynamics","title":"1999-2025 Ford F-250\/F-350 Super Duty V.S. 2.0 Aluminum Series Steering Stabilizer Shock Dual Opposing Icon Vehicle Dynamics","description":"\u003cp\u003eA steering stabilizer resists the side-to-side motion and vibration that travels from your tires to your control arms, to your steering system, and ultimately to your steering wheel. The mount and intensity of the side loading and vibrations go up as you increase tire size and\/or change your rig's geometry with a lift kit.\u003c\/p\u003e\u003cp\u003eICON steering stabilizers use ICON 2.0 Series shock absorbers to isolate your steering components from road or trail harshness so you always have smooth, predictable control of your vehicle.\u003c\/p\u003e\u003cb\u003eFeatures and Benefits:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eDual opposing shock design requires two shocks\u003c\/li\u003e\n\u003cli\u003eFeatures ICON 2.0 Series shock absorber\u003c\/li\u003e\n\u003cli\u003eNitrogen charged monotube design with internal reservoir\u003c\/li\u003e\n\u003cli\u003eOne piece linear\/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n\u003cli\u003e5\/8 Inch chrome plated hardened steel shaft resists corrosion and pits\u003c\/li\u003e\n\u003cli\u003e6061 aluminum rod end, top cap, and internals ensure strength and durability\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment\u003c\/li\u003e\n\u003cli\u003e6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance\u003c\/li\u003e\n\u003cli\u003eNitrile rubber top out bumper for noise free operation\u003c\/li\u003e\n\u003cli\u003e100 Percent rebuildable\u003c\/li\u003e\n\u003cli\u003e100 Percent revalveable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eColor: Light Grey\u003c\/li\u003e\n\u003cli\u003eAdjustable Damping: No\u003c\/li\u003e\n\u003cli\u003eCompressed Length: 14.25\u003c\/li\u003e\n\u003cli\u003eCylinder Diameter: 2.0\u003c\/li\u003e\n\u003cli\u003eCylinder Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eDamping Type: Oil\u003c\/li\u003e\n\u003cli\u003eExtended Length: 22.7\u003c\/li\u003e\n\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\n\u003cli\u003eLower Mount Type: Eyelet\u003c\/li\u003e\n\u003cli\u003eMounting Bracket Included: No\u003c\/li\u003e\n\u003cli\u003eService Parts: 202002 - 2.0 Ifp Rebuild Kit\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: 0.625\u003c\/li\u003e\n\u003cli\u003eShaft Material: Chrome\u003c\/li\u003e\n\u003cli\u003eShock Travel Length: 8.45\u003c\/li\u003e\n\u003cli\u003eSteering Stabilizer Configuration: Dual\u003c\/li\u003e\n\u003cli\u003eUpper Mount Type: Eyelet\u003c\/li\u003e\n\u003cli\u003eAdd On Part: 614700 - 2.0 Shock Boot Kit (Each), 65002 - 23-25 FSD Dual Stabilizer Kit, 65000 - 05-22 FSD Dual Stabilizer Kit, 32170 - 99-04 FSD Dual Stabilizer Bracket Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44282516144170,"sku":"FRDK_36511","price":195.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/36511-FRDK.jpg?v=1776964199"},{"product_id":"2005-2022-ford-f-250-f-350-super-duty-2-0-vs-dual-steering-stabilizer-kit-icon-vehicle-dynamics","title":"2005-2022 Ford F-250\/F-350 Super Duty 2.0 Vs Dual Steering Stabilizer Kit Icon Vehicle Dynamics","description":"\u003cp\u003eThe ICON 2005-2022 Ford Super Duty F-250 \/ F-350 4WD Dual Steering Stabilizer System is designed to minimize bump steer feedback and smooths out the roughest of terrains felt through the steering wheel. By mounting the 2.0 Aluminum Series shock absorbers in an opposing manner the push\/pull effect from their internal pressure is canceled out.\u003c\/p\u003e\u003cp\u003eThis allows for far greater steering damping than available from a single, similarly sized steering stabilizer shock while ensuring the truck tracks straight down the road. This system bolts to the factory differential cover and wraps around the axle for a secure fit without cutting, welding or drilling.\u003c\/p\u003e\u003cp\u003eThe shocks are connected to the tire rod with black anodized billet aluminum clamps for a secure fit and clean finish.\u003c\/p\u003e\u003cb\u003eFeatures and Benefits:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eDual opposing design eliminates the push\/pull sensation associated with traditional stabilizers\u003c\/li\u003e\n\u003cli\u003eDual 2.0 aluminum Series shocks offer Increased steering damping over stock unit\u003c\/li\u003e\n\u003cli\u003eProvides symmetrical steering feel throughout input range\u003c\/li\u003e\n\u003cli\u003eCNC laser cut steel components\u003c\/li\u003e\n\u003cli\u003eSemi-gloss black powder coat finish\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum tie rod clamps, anodized for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 Percent bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoated\u003c\/li\u003e\n\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes\u003c\/li\u003e\n\u003cli\u003eUniversal Or Specific Fit: Specific\u003c\/li\u003e\n\u003cli\u003eAdd On Part: 66515 - 08-10 \u0026amp; 15-16 Wide Track FSD 4WD Stabilizer (Dual) 2.0 Ir, 64037 - 05-25 FSD 2 Inch Bump Stop Spacer Kit, 36511 - 99-25 FSD 4WD Stabilizer (Dual Opposing) 2.0 Vs Ir\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44282534690858,"sku":"FRDK_65000","price":317.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/65000-FRDK.jpg?v=1776964879"},{"product_id":"2023-2025-ford-f-250-f-350-super-duty-dual-steering-stabilizer-bracket-kit-icon-vehicle-dynamics","title":"2023-2025 Ford F-250\/F-350 Super Duty Dual Steering Stabilizer Bracket Kit Icon Vehicle Dynamics","description":"\u003cp\u003eThe ICON 2023-2025 Ford Super Duty F-250 \/ F-350 4WD Dual Steering Stabilizer System is designed to minimize bump steer feedback and smooths out the roughest of terrains felt through the steering wheel. By mounting the 2.0 Aluminum Series shock absorbers in an opposing manner the push\/pull effect from their internal pressure is canceled out.\u003c\/p\u003e\u003cp\u003eThis allows for far greater steering damping than available from a single, similarly sized steering stabilizer shock while ensuring the truck tracks straight down the road. This system bolts to the factory differential cover and wraps around the axle for a secure fit without cutting, welding or drilling.\u003c\/p\u003e\u003cp\u003eThe shocks are connected to the tire rod with black anodized billet aluminum clamps for a secure fit and clean finish.\u003c\/p\u003e\u003cb\u003eFeatures and Benefits:\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eDual opposing design eliminates the push\/pull sensation associated with traditional stabilizers\u003c\/li\u003e\n\u003cli\u003eDual 2.0 aluminum Series shocks offer Increased steering damping over stock unit\u003c\/li\u003e\n\u003cli\u003eProvides symmetrical steering feel throughout input range\u003c\/li\u003e\n\u003cli\u003eCNC laser cut steel components\u003c\/li\u003e\n\u003cli\u003eSemi-gloss black powder coat finish\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum tie rod clamps, anodized for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100 Percent bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003eDetails\u003c\/b\u003e\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eMaterial: Steel\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoated\u003c\/li\u003e\n\u003cli\u003eGrade Type: Performance\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes\u003c\/li\u003e\n\u003cli\u003eUniversal Or Specific Fit: Specific\u003c\/li\u003e\n\u003cli\u003eAdd On Part: 64037 - 05-25 FSD 2 Inch Bump Stop Spacer Kit, 36511 - 99-25 FSD 4WD Stabilizer (Dual Opposing) 2.0 Vs Ir\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44282648690730,"sku":"FRDK_65002","price":317.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/65002-FRDK.jpg?v=1776968744"}],"url":"https:\/\/www.ltwmotorsports.com\/collections\/steering-stabilizer.oembed","provider":"LTW Motorsports","version":"1.0","type":"link"}