{"title":"Control Arms","description":"","products":[{"product_id":"2007-2018-chevy-gmc-1500-billet-upper-control-arms","title":"2007-2018 CHEVY\/GMC 1500 BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Chevy or GMC truck. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.ltwmotorsports.com\/pages\/which-control-arms-do-you-have\" data-mce-href=\"https:\/\/www.ltwmotorsports.com\/pages\/which-control-arms-do-you-have\" data-mce-fragment=\"1\"\u003eWhich OEM Control Arms do You Have?\u003c\/a\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequires factory service stop removal\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Cast Steel 07-16 Models \/ Silver","offer_id":40595826999338,"sku":"MZS-C1-2B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Cast Steel 07-16 Models \/ Black","offer_id":42936051662890,"sku":"MZS-C1-2B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Cast Steel 07-16 Models \/ King Blue","offer_id":42936051695658,"sku":"MZS-C1-2B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Cast Aluminum 14-16 Models \/ Silver","offer_id":40595827032106,"sku":"MZS-C1-3B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Cast Aluminum 14-16 Models \/ Black","offer_id":42936051728426,"sku":"MZS-C1-3B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Cast Aluminum 14-16 Models \/ King Blue","offer_id":42936051761194,"sku":"MZS-C1-3B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Stamped Steel 16-18 Models \/ Silver","offer_id":40595827064874,"sku":"MZS-C1-3B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Stamped Steel 16-18 Models \/ Black","offer_id":42936051793962,"sku":"MZS-C1-3B","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Stamped Steel 16-18 Models \/ King Blue","offer_id":42936051826730,"sku":"MZS-C1-3B","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p.jpg?v=1743698097"},{"product_id":"2019-chevy-gmc-1500-billet-upper-control-arms","title":"2019+ CHEVY\/GMC 1500 BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Chevy or Gmc truck. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. In order to get maximum Offroad performance and increased wheel travel we use King shocks “trailboss” version rear shocks which require a 1-2” lift block. The GMC AT4, Chevy Silverado trailboss as well as some Z71 or 4x4 trucks come from the factory with lift block pre-installed. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequires factory service stop removal\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRear lift block may be required, see description \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936047435818,"sku":"MZS-C1-4","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936047468586,"sku":"MZS-C1-4","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936047501354,"sku":"MZS-C1-4","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_67e7eafd-8be2-49d7-bd7d-2ffac52bfba4.jpg?v=1743698094"},{"product_id":"2011-2019-chevy-gmc-2500-3500-hd-billet-upper-control-arms","title":"2011-2019 CHEVY\/GMC 2500\/3500 HD BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Chevy or Gmc truck. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequires factory service stop removal\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936045273130,"sku":"MZS-C1-5","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936045305898,"sku":"MZS-C1-5","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936045338666,"sku":"MZS-C1-5","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_41ff8dee-2698-4a01-8368-b114eadc6009.jpg?v=1743698093"},{"product_id":"2020-chevy-gmc-2500-3500-hd-billet-upper-control-arms","title":"2020+ CHEVY\/GMC 2500\/3500 HD BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Chevy or Gmc truck. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequires factory service stop removal\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936044290090,"sku":"MZS-C1-6","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936044322858,"sku":"MZS-C1-6","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936044355626,"sku":"MZS-C1-6","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_41ff8dee-2698-4a01-8368-b114eadc6009.jpg?v=1743698093"},{"product_id":"2021-ram-trx-billet-upper-control-arms","title":"2021+ RAM TRX BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Ram TRX truck. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936042618922,"sku":"MZS-D1-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936042651690,"sku":"MZS-D1-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936042684458,"sku":"MZS-D1-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_137dde58-f94e-46cb-be52-c5eaa6acc666.jpg?v=1743698090"},{"product_id":"2010-2014-ford-raptor-billet-upper-control-arms","title":"2010-2014 FORD RAPTOR BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Ford Raptor. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8 \"Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936041504810,"sku":"MZS-F1-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936041537578,"sku":"MZS-F1-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936041570346,"sku":"MZS-F1-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_955e151e-ffa0-4795-865d-d794c7a1bf83.jpg?v=1743698089"},{"product_id":"2017-2018-ford-raptor-billet-upper-control-arms","title":"2017-2018 FORD RAPTOR BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Ford Raptor. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8 \"Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936039309354,"sku":"MZS-F1-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936039342122,"sku":"MZS-F1-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936039374890,"sku":"MZS-F1-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_955e151e-ffa0-4795-865d-d794c7a1bf83.jpg?v=1743698089"},{"product_id":"2019-2021-ford-raptor-with-live-valve-billet-upper-control-arms","title":"2019-2021 FORD RAPTOR WITH LIVE VALVE BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Ford Raptor. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\" \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936035508266,"sku":"MZS-F1-1L-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936035541034,"sku":"MZS-F1-1L-1","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936035573802,"sku":"MZS-F1-1L-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_955e151e-ffa0-4795-865d-d794c7a1bf83.jpg?v=1743698089"},{"product_id":"2021-ford-raptor-with-live-valve-billet-upper-control-arms","title":"2021+ FORD RAPTOR WITH LIVE VALVE BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Ford Raptor. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\" \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936033837098,"sku":"MZS-F1-1L2","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936033869866,"sku":"MZS-F1-1L2","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936033902634,"sku":"MZS-F1-1L2","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_955e151e-ffa0-4795-865d-d794c7a1bf83.jpg?v=1743698089"},{"product_id":"2021-ford-bronco-billet-upper-control-arms","title":"2021+ FORD BRONCO BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Ford Bronco suv. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936029282346,"sku":"MZS-F1-2","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936029315114,"sku":"MZS-F1-2","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936029347882,"sku":"MZS-F1-2","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_dca8e7f2-2643-49c3-87aa-807258cc5a9d.jpg?v=1743698084"},{"product_id":"2005-toyota-tacoma-billet-upper-control-arms","title":"2005+ TOYOTA TACOMA BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Toyota Tacoma. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. \u003cspan data-mce-fragment=\"1\"\u003eThe combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936026398762,"sku":"MZS-T1-1","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936026431530,"sku":"MZS-T1-1","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936026464298,"sku":"MZS-T1-1","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_792e5e63-ba9b-4a25-8ad5-994e410a4b78.jpg?v=1743698083"},{"product_id":"2010-toyota-4-runner-billet-upper-control-arms","title":"2010+ TOYOTA 4-RUNNER BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Toyota 4-Runner. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. This kit can be ordered with shocks that require clearance for KDSS systems, please specify at time of purchase. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936022630442,"sku":"MZS-T1-2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936022663210,"sku":"MZS-T1-2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936022695978,"sku":"MZS-T1-2","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_792e5e63-ba9b-4a25-8ad5-994e410a4b78.jpg?v=1743698083"},{"product_id":"2007-toyota-fj-cruiser-billet-upper-control-arm","title":"2007+ TOYOTA FJ CRUISER BILLET UPPER CONTROL ARM","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Toyota Fj cruiser. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936020303914,"sku":"MZS-T1-2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936020336682,"sku":"MZS-T1-2","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936020369450,"sku":"MZS-T1-2","price":1499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_792e5e63-ba9b-4a25-8ad5-994e410a4b78.jpg?v=1743698083"},{"product_id":"2007-2021-toyota-tundra-billet-upper-control-arms","title":"2007-2021 TOYOTA TUNDRA BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Toyota Tundra. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be used on 2wd and 4wd suspension\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936019124266,"sku":"MZS-T1-3","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936019157034,"sku":"MZS-T1-3","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936019189802,"sku":"MZS-T1-3","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_337149d8-ac89-49db-a540-9d71e1cc7ca7.jpg?v=1743698079"},{"product_id":"2022-toyota-tundra-billet-upper-control-arms","title":"2022+ TOYOTA TUNDRA BILLET UPPER CONTROL ARMS","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThese billet machined uniball upper control arms are the ultimate performance, strength and durability gain for the front of your Toyota Tundra truck. In a lifted application the upper control arms need corrected camber and caster geometry so that the factory alignment can be achieved. When adding aftermarket extended travel coilover shocks you will need more angularity in the upper control arm outer suspension pivot and these large 1.25\" uniball bearings offer more clearance as well as an increased strength and longevity of the joint. The heim joint spacers and uniball pins are made using heat treated stainless steel and hold a tolerance .0005\" for maximum fitment on bearing bores and factory upright tapers. These arms are machined in low volume using USA materials and the attention to detail are second to none. The combination of the upper control arm and a shock \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003ewill yield improved handling characteristics, strength for offroad use and 40% increased wheel travel while maintaining the stock track width and suspension mounting locations.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ease of installation, high quality billet control arms and a race style shock absorber make this setup a great choice for anyone wanting to go fast in the dirt. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed and engineered\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet machined 6061 aluminum construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK Teflon lined 1.250\" uniballs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFK 7\/8\" Heim Joint inner pivots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAircraft grade 12 point pin hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17-4 heat treated stainless steel pins and spacers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring sealed uniball cover\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum alignment capability compared to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved geometry for lifted applications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilver anodize finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eApplication Notes:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRecommended wheel backspace is 4.75\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAZZULLA OFFROAD","offers":[{"title":"Silver","offer_id":42936015159338,"sku":"MZS-T1-4","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":42936015192106,"sku":"MZS-T1-4","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"King Blue","offer_id":42936015224874,"sku":"MZS-T1-4","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/p_9005351e-3126-45e2-96ce-26f96b5c09d4.jpg?v=1743698078"},{"product_id":"19-23-gm-1500-performance-lower-control-arms","title":"19-24 GM 1500 Performance Lower Control Arms","description":"The Dirt King performance lower control arms are designed to withstand off road abuse and not compromise the vehicle's on-road driving characteristics. When off-roading the most vulnerable suspension component is the lower control arms. The Dirt King lower control arms have an internal ribbed design and are substantially stronger than OEM lower control arms. \u003cbr\u003e\u003cbr\u003e To improve off road handling the Dirt King lower control arms have additional tabbing to accommodate for bump stops, limit straps, and bypasses. There is also the option to retain the factory sway bar with the addition of Dirt King sway bar end links.\u003cbr\u003e\u003cbr\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. For the inner pivots the arms accept the factory bushings. The OEM bushings allow for enough articulation and don't require maintenance. The Dirt King performance lower control arms are a direct bolt on part with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Recommended Tire Size: 35”\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 17”\u003cbr\u003eCompatible with factory sway bar: Yes\u003cbr\u003eBump Stop Size: 2.0 x 2.0\u003cbr\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate lower control arms\u003cbr\u003eMoog ball joints\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003eDurable black powder coat finish\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed\u003cbr\u003eInternally ribbed design\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eBump stop plating\u003cbr\u003eLimit strap tabbing\u003cbr\u003eBypass tabbing\u003cbr\u003eSway bar tabbing\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e Compatibility\u003cbr\u003e2019-2023 Chevy Silverado 1500 2WD \/ 4WD\u003cbr\u003e2019-2023 GMC Sierra 1500 2WD \/ 4WD\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564681539626,"sku":"DK-636904","price":1955.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/performance_lower_control_arms_chevy_sierra_1500_DK_6369043_1400x_9ea15ba8-703f-467d-899c-3eed357297ed.webp?v=1690741450"},{"product_id":"15-22-colorado-canyon-boxed-upper-control-arms","title":"15-22 Colorado\/ Canyon Boxed Upper Control Arms","description":"There are multiple issues when lifting your vehicle with stock upper control arms. Both the geometry and strength are compromised due to over articulating the stock arms. We solved these problems by designing our upper control arms with increased castor and repositioned pivot angles reducing stress on the joints. The increased castor allows for proper alignment and improved handling. We also replaced the weak factory ball joints with 1” stainless steel uniballs for maximum strength and increased articulation. For the inner pivots we use durable urethane bushings with grease fittings for easy servicing. To mount the arms to the spindle we include high grade 17-4 stainless steel misalignment spacers and military grade F911 hardware. All of the components on our upper control arms are rebuild-able or replaceable to make this product last a lifetime. The arms come preassembled and include detailed instructions for easy installation.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 17”\u003cbr\u003eCoil over Shock Size: Factory or OEM replacement coilovers\u003cbr\u003eWheel Travel \/ Lift\u003cbr\u003eThe upper control arms must be paired with OEM replacement coil overs to lift the vehicle. These arms are compatible with King, Fox, Bilstein, ADS and Icon coil overs. Do not install these upper control arms with coil spacers that over articulate the suspension.\u003cbr\u003e\u003cbr\u003eTire Info\u003cbr\u003eThe upper control arms allow for 33” tires but for proper tire clearance modifications to the wheel well and bumper may need to be made.\u003cbr\u003e\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate upper control arms\u003cbr\u003eUrethane bushings\u003cbr\u003eGrease fittings\u003cbr\u003e1” FK uniballs\u003cbr\u003e17-4 stainless steel misalignment spacers\u003cbr\u003eMilitary grade F911 hardware\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eDurable black powder coat\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed \u003cbr\u003eBoxed plate construction\u003cbr\u003e4130 chromoly uniball cups\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fittings for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564684521514,"sku":"DK-634902","price":832.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_colorado_canyon_uniball_upper_control_arms_UCA_polyurathane_bushings_1400x_7b84b914-fda6-449c-800d-039bfbe9ac52.jpg?v=1690742096"},{"product_id":"10-20-ford-raptor-heim-boxed-upper-control-arms","title":"10-20 Ford Raptor Heim Boxed Upper Control Arms","description":"\u003cp\u003eThere are multiple issues when lifting your vehicle with stock upper control arms. Both the geometry and strength are compromised due to over articulating the stock arms. We solved these problems by designing our upper control arms with increased castor and repositioned pivot angles reducing stress on the joints. The increased castor allows for proper alignment and improved handling. We also replaced the weak factory ball joints with 1” stainless steel uniballs for maximum strength and increased articulation. For the inner pivots we used heavy duty ¾” FK heims for additional camber and caster adjustability. To mount the arms to the spindle we include high grade 17-4 stainless steel misalignment spacers and grade 8 hardware. All of the components on our upper control arms are rebuild-able or replaceable to make this product last a lifetime. The arms come preassembled and include detailed instructions for easy installation.\u003c\/p\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564685963306,"sku":"DK-925903","price":979.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_ford_raptor_upper_control_arms_UCA_s_heim_rod_ends_fk_uniball_1400x_14034368-874a-4623-9fbc-c842313eaaf4.jpg?v=1690742425"},{"product_id":"04-21-nissan-titan-performance-lower-control-arms","title":"04-21 Nissan Titan Performance Lower Control Arms","description":"The Dirt King performance lower control arms are remarkably stronger and have improved geometry compared to the factory lower control arms. We have corrected the ball joint angle reducing stress and wear on the joint. For the 4WD models we eliminated axle rub by improving the shock placement allowing for more clearance between the axle and the shock. We have also upgraded the from the weak factory ball joints to heavy duty Moog ball joints. For the inner pivots we replaced the soft factory bushings with our custom machined delrin bushings. There are several major advantages of using delrin bushings compared to the softer bushings such as stock or urethane. The delrin bushings eliminate forward and backward movement of the lower arm along with allowing for a freer range of upward and downward motion unlike the injected factory bushings. They are also tabbed to accommodate for bump stops and limit straps to be used if you choose. The arms come fully assembled and include detailed instructions for easy installation.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Tire Size: 33”\u003cbr\u003eMaximum Backspacing: 5.25”\u003cbr\u003eMinimum Rim Size: 17”\u003cbr\u003eCompatible with factory sway bar: No\u003cbr\u003eBump Stop Size: 2.0 x 2.0\u003cbr\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr\u003e \u003cbr\u003e What's Included\u003cbr\u003eBoxed plate lower control arms\u003cbr\u003eDelrin bushings\u003cbr\u003eGrease fittings\u003cbr\u003eMoog ball joints\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eDurable black powder coat\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed \u003cbr\u003eFormed steel bushing gussets\u003cbr\u003eInternally ribbed with extrusions for weight reduction\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e Instructions\u003cbr\u003eInstallation\u003cbr\u003eThese arms do not work with the factory sway bar and must be used with coil overs that have a spherical lower rod end. The use of hydraulic bump stops require cutting and welding to the frame.\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564689240106,"sku":"DK-701904","price":1665.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_titan_lower_control_arms_LCA_moog_ball_joint_delrin_bushings_extended_travel_1400x_9bab406d-1977-4bbe-9ea6-8d155bde9f09.jpg?v=1690743401"},{"product_id":"07-21-toyota-tundra-boxed-upper-control-arms","title":"07-21 Toyota Tundra Boxed Upper Control Arms","description":"There are multiple issues when lifting your vehicle with stock upper control arms. Both the geometry and strength are compromised due to over articulating the stock arms. We solved these problems by designing our upper control arms with increased castor and repositioned pivot angles reducing stress on the joints. The increased castor allows for proper alignment and improved handling. We also replaced the weak factory ball joints with 1” stainless steel uniballs for maximum strength and increased articulation. For the inner pivots we use durable urethane bushings with grease fittings for easy servicing. To mount the arms to the spindle we include high grade 17-4 stainless steel misalignment spacers and military grade F911 hardware. All of the components on our upper control arms are rebuild-able or replaceable to make this product last a lifetime. The arms come preassembled and include detailed instructions for easy installation.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eWheel Travel: Additional 1” of travel compared to stock\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 5”\u003cbr\u003eMinimum Rim Size: 16”\u003cbr\u003eCoil over Shock Size:Factory or OEM replacement coilovers\u003cbr\u003eWheel Travel \/ Lift\u003cbr\u003eThe upper control arms must be paired with OEM replacement coil overs to lift the vehicle. They offer an additional 1” of down travel compared to the stock upper control arms. These arms are compatible with King, Fox, Bilstein, ADS and Icon coil overs. Do not install these upper control arms with coil spacers that over articulate the suspension.\u003cbr\u003e\u003cbr\u003eTire Info\u003cbr\u003eThe upper control arms will allow for 35” tires but the front section of the cab mount may need to be cut to avoid tire rubbing while turning. In addition the front bumper may require trimming for proper tire clearance.\u003cbr\u003e\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate upper control arms\u003cbr\u003eUrethane bushings\u003cbr\u003eGrease fittings\u003cbr\u003e1” FK uniballs\u003cbr\u003e17-4 stainless steel misalignment spacers\u003cbr\u003eMilitary grade F911 hardware\u003cbr\u003eZinc plated bushing washers\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eDurable black powder coat\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed \u003cbr\u003eBoxed plate construction\u003cbr\u003e4130 chromoly uniball cups\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564751728682,"sku":"DK-815902","price":832.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_toyota_tundra_uniball_polyeruthane_bushings_incresaed_lift_1400x_4a2a1ec6-7225-4b0d-819e-35352f42456a.jpg?v=1690762066"},{"product_id":"05-15-toyota-tacoma-performance-lower-control-arms","title":"05-15 Toyota Tacoma Performance Lower Control Arms","description":"The Dirt King performance lower control arms were developed to withstand off road abuse and not compromise the vehicles on road driving characteristics. The most vulnerable suspension component on the Tacoma's are the lower control arms. The Dirt King control arms have additional ground clearance and include 1\/8\"\" aluminum skid plates for added protection. If there's any major contact the internal ribbed design keeps the crucial parts intact so your not left stranded on the trail.\u003cbr\u003e\u003cbr\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. Controlled side by side testing was done between Moog ball joints and the industry standard 1\"\" uniball for the outer pivot. The result was better on road tracking with the Moog ball joints. Other benefits include a sealed housing to eliminate noise, longer life span, and readily available at auto part stores. \u003cbr\u003e\u003cbr\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, poly bushings, and uniballs. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise, uniballs quickly become contaminated with dirt making them noisy and they're also expensive to replace.\u003cbr\u003e\u003cbr\u003e Additional features on the Dirt King lower control arms include recessed shock mounting with a drain hole and accepts all types of shocks and struts. It also accommodates for bump stops and limit straps. Progressive steering stops limit the steering throughout the suspension cycle to allow for maximum steering without over articulating the CV's or tie rods. This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Tire Size: 35”\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003cbr\u003eCompatible with factory sway bar: Yes\u003cbr\u003eBump Stop Size: 2.0 x 2.0\u003cbr\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr\u003eTire Info\u003cbr\u003eIf installing 35” tires modifications to the wheel wells and bumper will need to be made for proper tire clearance.\u003cbr\u003e\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate lower control arms\u003cbr\u003e1\/8\"\" aluminum skid plate\u003cbr\u003eDelrin bushings\u003cbr\u003eGrease fittings\u003cbr\u003eMoog ball joints\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eZinc plated bump stop spacers\u003cbr\u003eDurable black powder coat finish\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed\u003cbr\u003eSlanted front plate to deflect objects\u003cbr\u003eInternally ribbed with extrusions for weight reduction\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eBump stop plating\u003cbr\u003eLimit strap tabbing\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564752875562,"sku":"DK-811704","price":1812.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_toyota_tacoma_performence_lower_control_arms_delrin_bushings_offroad_main_1400x_ba97c911-fea3-41e4-8300-a028c74f4e51.jpg?v=1690762746"},{"product_id":"03-09-toyota-4runner-performance-lower-control-arms","title":"03-09 Toyota 4Runner Performance Lower Control Arms","description":"The Dirt King performance lower control arms were developed to withstand off road abuse and not compromise the vehicles on road driving characteristics. The most vulnerable suspension component on the 4Runner's and FJ Cruiser's are the lower control arms. The Dirt King control arms have additional ground clearance and include 1\/8\"\" aluminum skid plates for added protection. If there's any major contact the internal ribbed design keeps the crucial parts intact so your not left stranded on the trail.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. Controlled side by side testing was done between Moog ball joints and the industry standard 1\"\" uniball for the outer pivot. The result was better on road tracking with the Moog ball joints. Other benefits include a sealed housing to eliminate noise, longer life span, and readily available at auto part stores. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, poly bushings, and uniballs. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise, uniballs quickly become contaminated with dirt making them noisy and they're also expensive to replace.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Additional features on the Dirt King lower control arms include recessed shock mounting with a drain hole and accepts all types of shocks and struts. It also accommodates for bump stops and limit straps. Progressive steering stops limit the steering throughout the suspension cycle to allow for maximum steering without over articulating the CV's or tie rods. This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Specifications\u003cbr data-mce-fragment=\"1\"\u003eTrack Width: Stock\u003cbr data-mce-fragment=\"1\"\u003eMaximum Tire Size: 35”\u003cbr data-mce-fragment=\"1\"\u003eMaximum Backspacing: 4.75”\u003cbr data-mce-fragment=\"1\"\u003eMinimum Rim Size: 16”\u003cbr data-mce-fragment=\"1\"\u003eCompatible with factory sway bar: Yes\u003cbr data-mce-fragment=\"1\"\u003eBump Stop Size: 2.0 x 2.0\u003cbr data-mce-fragment=\"1\"\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr data-mce-fragment=\"1\"\u003eTire Info\u003cbr data-mce-fragment=\"1\"\u003eIf installing 35” tires modifications to the wheel wells and bumper will need to be made for proper tire clearance.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e What's Included\u003cbr data-mce-fragment=\"1\"\u003eBoxed plate lower control arms\u003cbr data-mce-fragment=\"1\"\u003e1\/8\"\" aluminum skid plate\u003cbr data-mce-fragment=\"1\"\u003eDelrin bushings\u003cbr data-mce-fragment=\"1\"\u003eGrease fittings\u003cbr data-mce-fragment=\"1\"\u003eMoog ball joints\u003cbr data-mce-fragment=\"1\"\u003eBrushed stainless steel logo plates\u003cbr data-mce-fragment=\"1\"\u003eGrade 8 mounting hardware\u003cbr data-mce-fragment=\"1\"\u003eZinc plated inner bushing sleeves\u003cbr data-mce-fragment=\"1\"\u003eZinc plated bump stop spacers\u003cbr data-mce-fragment=\"1\"\u003eDurable black powder coat finish\u003cbr data-mce-fragment=\"1\"\u003eDirt King sticker pack\u003cbr data-mce-fragment=\"1\"\u003eInstallation instructions\u003cbr data-mce-fragment=\"1\"\u003e Features\u003cbr data-mce-fragment=\"1\"\u003eCAD designed\u003cbr data-mce-fragment=\"1\"\u003eSlanted front plate to deflect objects\u003cbr data-mce-fragment=\"1\"\u003eInternally ribbed with extrusions for weight reduction\u003cbr data-mce-fragment=\"1\"\u003ePreassembled for fast installation\u003cbr data-mce-fragment=\"1\"\u003eGrease fitting ports for easy servicing\u003cbr data-mce-fragment=\"1\"\u003eZinc plated components for corrosion resistance\u003cbr data-mce-fragment=\"1\"\u003eBump stop plating\u003cbr data-mce-fragment=\"1\"\u003eLimit strap tabbing\u003cbr data-mce-fragment=\"1\"\u003eProfessionally MIG welded\u003cbr data-mce-fragment=\"1\"\u003eProudly made in the USA\u003cbr data-mce-fragment=\"1\"\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564752941098,"sku":"DK-811704","price":1812.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_toyota_tacoma_performence_lower_control_arms_delrin_bushings_offroad_main_1400x_314eec2f-40c5-4ce5-93df-d05742455303.jpg?v=1690762862"},{"product_id":"07-09-toyota-fj-cruiser-performance-lower-control-arms","title":"07-09 Toyota FJ Cruiser Performance Lower Control Arms","description":"The Dirt King performance lower control arms were developed to withstand off road abuse and not compromise the vehicles on road driving characteristics. The most vulnerable suspension component on the 4Runner's and FJ Cruiser's are the lower control arms. The Dirt King control arms have additional ground clearance and include 1\/8\"\" aluminum skid plates for added protection. If there's any major contact the internal ribbed design keeps the crucial parts intact so your not left stranded on the trail.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. Controlled side by side testing was done between Moog ball joints and the industry standard 1\"\" uniball for the outer pivot. The result was better on road tracking with the Moog ball joints. Other benefits include a sealed housing to eliminate noise, longer life span, and readily available at auto part stores. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, poly bushings, and uniballs. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise, uniballs quickly become contaminated with dirt making them noisy and they're also expensive to replace.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Additional features on the Dirt King lower control arms include recessed shock mounting with a drain hole and accepts all types of shocks and struts. It also accommodates for bump stops and limit straps. Progressive steering stops limit the steering throughout the suspension cycle to allow for maximum steering without over articulating the CV's or tie rods. This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Specifications\u003cbr data-mce-fragment=\"1\"\u003eTrack Width: Stock\u003cbr data-mce-fragment=\"1\"\u003eMaximum Tire Size: 35”\u003cbr data-mce-fragment=\"1\"\u003eMaximum Backspacing: 4.75”\u003cbr data-mce-fragment=\"1\"\u003eMinimum Rim Size: 16”\u003cbr data-mce-fragment=\"1\"\u003eCompatible with factory sway bar: Yes\u003cbr data-mce-fragment=\"1\"\u003eBump Stop Size: 2.0 x 2.0\u003cbr data-mce-fragment=\"1\"\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr data-mce-fragment=\"1\"\u003eTire Info\u003cbr data-mce-fragment=\"1\"\u003eIf installing 35” tires modifications to the wheel wells and bumper will need to be made for proper tire clearance.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e What's Included\u003cbr data-mce-fragment=\"1\"\u003eBoxed plate lower control arms\u003cbr data-mce-fragment=\"1\"\u003e1\/8\"\" aluminum skid plate\u003cbr data-mce-fragment=\"1\"\u003eDelrin bushings\u003cbr data-mce-fragment=\"1\"\u003eGrease fittings\u003cbr data-mce-fragment=\"1\"\u003eMoog ball joints\u003cbr data-mce-fragment=\"1\"\u003eBrushed stainless steel logo plates\u003cbr data-mce-fragment=\"1\"\u003eGrade 8 mounting hardware\u003cbr data-mce-fragment=\"1\"\u003eZinc plated inner bushing sleeves\u003cbr data-mce-fragment=\"1\"\u003eZinc plated bump stop spacers\u003cbr data-mce-fragment=\"1\"\u003eDurable black powder coat finish\u003cbr data-mce-fragment=\"1\"\u003eDirt King sticker pack\u003cbr data-mce-fragment=\"1\"\u003eInstallation instructions\u003cbr data-mce-fragment=\"1\"\u003e Features\u003cbr data-mce-fragment=\"1\"\u003eCAD designed\u003cbr data-mce-fragment=\"1\"\u003eSlanted front plate to deflect objects\u003cbr data-mce-fragment=\"1\"\u003eInternally ribbed with extrusions for weight reduction\u003cbr data-mce-fragment=\"1\"\u003ePreassembled for fast installation\u003cbr data-mce-fragment=\"1\"\u003eGrease fitting ports for easy servicing\u003cbr data-mce-fragment=\"1\"\u003eZinc plated components for corrosion resistance\u003cbr data-mce-fragment=\"1\"\u003eBump stop plating\u003cbr data-mce-fragment=\"1\"\u003eLimit strap tabbing\u003cbr data-mce-fragment=\"1\"\u003eProfessionally MIG welded\u003cbr data-mce-fragment=\"1\"\u003eProudly made in the USA\u003cbr data-mce-fragment=\"1\"\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564752973866,"sku":"DK-811704","price":1812.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_toyota_tacoma_performence_lower_control_arms_delrin_bushings_offroad_main_1400x_132d8658-37de-4620-b510-4c55b605e962.jpg?v=1690762933"},{"product_id":"16-23-toyota-tacoma-performance-lower-control-arms","title":"16-23 Toyota Tacoma Performance Lower Control Arms","description":"The Dirt King performance lower control arms were developed to withstand off road abuse and not compromise the vehicles on road driving characteristics. The most vulnerable suspension component on the Tacoma's are the lower control arms. The Dirt King control arms have additional ground clearance and include 1\/8\"\" aluminum skid plates for added protection. If there's any major contact the internal ribbed design keeps the crucial parts intact so your not left stranded on the trail.\u003cbr\u003e\u003cbr\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. Controlled side by side testing was done between Moog ball joints and the industry standard 1\"\" uniball for the outer pivot. The result was better on road tracking with the Moog ball joints. Other benefits include a sealed housing to eliminate noise, longer life span, and readily available at auto part stores. \u003cbr\u003e\u003cbr\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, poly bushings, and uniballs. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise, uniballs quickly become contaminated with dirt making them noisy and they're also expensive to replace.\u003cbr\u003e\u003cbr\u003e Additional features on the Dirt King lower control arms include recessed shock mounting with a drain hole and accepts all types of shocks and struts. It also accommodates for bump stops and limit straps. Progressive steering stops limit the steering throughout the suspension cycle to allow for maximum steering without over articulating the CV's or tie rods. This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Tire Size: 35”\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003cbr\u003eCompatible with factory sway bar: Yes\u003cbr\u003eBump Stop Size: 2.0 x 2.0\u003cbr\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr\u003eTire Info\u003cbr\u003eIf installing 35” tires modifications to the wheel wells and bumper will need to be made for proper tire clearance.\u003cbr\u003e\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate lower control arms\u003cbr\u003e1\/8\"\" aluminum skid plate\u003cbr\u003eDelrin bushings\u003cbr\u003eGrease fittings\u003cbr\u003eMoog ball joints\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eZinc plated bump stop spacers\u003cbr\u003eDurable black powder coat finish\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed\u003cbr\u003eSlanted front plate to deflect objects\u003cbr\u003eInternally ribbed with extrusions for weight reduction\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eBump stop plating\u003cbr\u003eLimit strap tabbing\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564753465386,"sku":"DK-813704","price":1812.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_toyota_tacoma_performence_lower_control_arms_delrin_bushings_offroad_main_1400x_a2449cfd-2000-4437-896e-e8072575e94d.jpg?v=1690763132"},{"product_id":"10-23-toyota-4runner-performance-lower-control-arms","title":"10-23 Toyota 4Runner Performance Lower Control Arms","description":"The Dirt King performance lower control arms were developed to withstand off road abuse and not compromise the vehicles on road driving characteristics. The most vulnerable suspension component on the 4Runner's and FJ Cruiser's are the lower control arms. The Dirt King control arms have additional ground clearance and include 1\/8\"\" aluminum skid plates for added protection. If there's any major contact the internal ribbed design keeps the crucial parts intact so your not left stranded on the trail.\u003cbr\u003e\u003cbr\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. Controlled side by side testing was done between Moog ball joints and the industry standard 1\"\" uniball for the outer pivot. The result was better on road tracking with the Moog ball joints. Other benefits include a sealed housing to eliminate noise, longer life span, and readily available at auto part stores. \u003cbr\u003e\u003cbr\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, poly bushings, and uniballs. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise, uniballs quickly become contaminated with dirt making them noisy and they're also expensive to replace.\u003cbr\u003e\u003cbr\u003e Additional features on the Dirt King lower control arms include recessed shock mounting with a drain hole and accepts all types of shocks and struts. It also accommodates for bump stops and limit straps. Progressive steering stops limit the steering throughout the suspension cycle to allow for maximum steering without over articulating the CV's or tie rods. This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Tire Size: 35”\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003cbr\u003eCompatible with factory sway bar: Yes\u003cbr\u003eBump Stop Size: 2.0 x 2.0\u003cbr\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr\u003eTire Info\u003cbr\u003eIf installing 35” tires modifications to the wheel wells and bumper will need to be made for proper tire clearance.\u003cbr\u003e\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate lower control arms\u003cbr\u003e1\/8\"\" aluminum skid plate\u003cbr\u003eDelrin bushings\u003cbr\u003eGrease fittings\u003cbr\u003eMoog ball joints\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eZinc plated bump stop spacers\u003cbr\u003eDurable black powder coat finish\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed\u003cbr\u003eSlanted front plate to deflect objects\u003cbr\u003eInternally ribbed with extrusions for weight reduction\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eBump stop plating\u003cbr\u003eLimit strap tabbing\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564754841642,"sku":"DK-814704","price":1812.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_toyota_tacoma_performence_lower_control_arms_delrin_bushings_offroad_main_1400x_6b39341f-ad0d-40e4-a369-4fd171ef3c65.jpg?v=1690763204"},{"product_id":"07-21-toyota-tundra-performance-lower-control-arms","title":"07-21 Toyota Tundra Performance Lower Control Arms","description":"The Dirt King performance lower control arms were developed to increase the vehicle's off road performance without compromising its on road drivability. These arms are remarkably stronger than the factory lower arms to withstand the abuse seen while off roading. If there's any major contact to damage the arm the internal ribbed design keeps the crucial parts intact so your not left stranded on the trail.\u003cbr\u003e\u003cbr\u003e To improve the off road handling the Dirt King lower control arms have additional tabbing to accommodate for bump stops, limit straps, and bypasses. They still accept the factory sway bar and work with any shocks that are compatible with the factory arms. The outer pivots utilize FK 1\"\" stainless steel uniballs for strength and additional articulation. High grade 17-4 stainless steel misalignment spacers and grade 8 mounting hardware is supplied to attach the lower arms to the spindles. Progressive steering stops are used to limit the steering throughout the suspension cycle allowing for maximum steering without over articulating the CV's or tie rods. \u003cbr\u003e\u003cbr\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, uniballs, and poly bushings. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, uniballs are more maintenance and higher cost to replace, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise.\u003cbr\u003e\u003cbr\u003e This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime.\u003cbr\u003e\u003cbr\u003e Specifications\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Tire Size: 35”\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 17”\u003cbr\u003eCompatible with factory sway bar: Yes\u003cbr\u003eBump Stop Size: 2.0 x 2.0\u003cbr\u003eCoil Over Shock Size: OEM replacement coil overs\u003cbr\u003eTire Info\u003cbr\u003eIf installing 35” tires modifications to the wheel wells and bumper may need to be made for proper tire clearance. \u003cbr\u003e\u003cbr\u003e What's Included\u003cbr\u003eBoxed plate lower control arms\u003cbr\u003eDelrin bushings\u003cbr\u003eGrease fittings\u003cbr\u003e1” FK uniballs\u003cbr\u003eBrushed stainless steel logo plates\u003cbr\u003e17-4 stainless steel misalignment spacers\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003eZinc plated inner bushing sleeves\u003cbr\u003eZinc plated bump stop spacers\u003cbr\u003eDurable black powder coat finish\u003cbr\u003eDirt King sticker pack\u003cbr\u003eInstallation instructions\u003cbr\u003e Features\u003cbr\u003eCAD designed\u003cbr\u003eFormed steel bushing gussets\u003cbr\u003eInternally ribbed with extrusions for weight reduction\u003cbr\u003ePreassembled for fast installation\u003cbr\u003eGrease fitting ports for easy servicing\u003cbr\u003eZinc plated components for corrosion resistance\u003cbr\u003eBump stop plating\u003cbr\u003eLimit strap tabbing\u003cbr\u003eBypass shock tabbing\u003cbr\u003eProfessionally MIG welded\u003cbr\u003eProudly made in the USA\u003cbr\u003e","brand":"DIRT KING","offers":[{"title":"Default Title","offer_id":40564755529770,"sku":"DK-815904","price":2155.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/Dirt_King_Fabrication_performence_lower_control_arms_LCA_shocks_delrin_bushings_FK_uniballs_mid_travel_1400x_5f1643ea-734a-4393-8b98-a849e76f673f.jpg?v=1690763409"},{"product_id":"05-22-toyota-tacoma-upper-control-arms","title":"05-22 Toyota Tacoma Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5\" -3\" lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1\" of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWill work with all aftermarket brand shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnly upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570793721898,"sku":"96504","price":967.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/3rd-gen-toyota-tacoma-performance-upper-control-arms-uca-uniball-96504.jpg?v=1749695999"},{"product_id":"03-22-toyota-4runner-upper-control-arms","title":"03-22 Toyota 4Runner Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5\" -3\" lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1\" of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWill work with all aftermarket brand shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnly upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570794639402,"sku":"96504","price":967.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/3rd-gen-toyota-tacoma-performance-upper-control-arms-uca-uniball-96504_a2659ff7-815c-460d-928e-cabf898bca8b.jpg?v=1749695998"},{"product_id":"22-23-toyota-tundra-upper-control-arms","title":"22-23 Toyota Tundra Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5''-3'' lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOT COMPATIBLE WITH:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTRD 3\" Suspension Lift Kit (PN: PTCCY34000)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdaptive Variable Suspension (AVS) equipped Tundras.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper Control Arm fits: 2022 Tundra, 2023 Tundra\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570794672170,"sku":"87502","price":1088.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/2022-3rd-gen-toyota-tundra-upper-control-arms-uca-uniball.jpg?v=1749695997"},{"product_id":"07-21-toyota-tundra-upper-control-arms","title":"07-21 Toyota Tundra Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5''-3'' lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1'' of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper Control Arm fits: 2007 Tundra, 2008 Tundra, 2009 Tundra, 2010 Tundra, 2011 Tundra, 2012 Tundra, 2013 Tundra, 2014 Tundra, 2015 Tundra, 2016 Tundra, 2017 Tundra, 2018 Tundra, 2019 Tundra, 2020 Tundra, 2021 Tundra.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570794737706,"sku":"87500","price":1064.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/2022-3rd-gen-toyota-tundra-upper-control-arms-uca-uniball_b03225c5-219f-4011-9fcb-8d89df0f5813.jpg?v=1749695996"},{"product_id":"07-17-toyota-fj-cruiser-upper-control-arms","title":"07-17 Toyota FJ Cruiser Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5\" -3\" lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1\" of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWill work with all aftermarket brand shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnly upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570794803242,"sku":"96504","price":967.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/3rd-gen-toyota-tacoma-performance-upper-control-arms-uca-uniball-96504_2c82b47a-3762-4aea-980a-0c8fa8c22889.jpg?v=1749695995"},{"product_id":"01-07-toyota-sequoia-upper-control-arms","title":"01-07 Toyota Sequoia Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC machined slug adapters press into the spindle and convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel. The lower hi-misalignment spacer registers into the slug adapter for maximum strength.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1'' of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot compatible with lift kits from Tuff Country.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper Control Arm fits: 2001 Sequoia, 2002 Sequoia, 2003 Sequoia, 2004 Sequoia, 2005 Sequoia, 2006 Sequoia, 2007 Sequoia.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570794967082,"sku":"97500","price":1050.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/1st-gen-toyota-sequoia-upper-control-arms-uca-uniball.jpg?v=1749695993"},{"product_id":"08-22-toyota-sequoia-upper-control-arms","title":"08-22 Toyota Sequoia Upper Control Arms","description":"\u003cspan\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5''-3'' lift kits are installed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1'' of additional wheel droop travel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570794999850,"sku":"87500","price":1064.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/2nd-gen-toyota-sequoia-upper-control-arms-uca.jpg?v=1749695992"},{"product_id":"08-21-toyota-land-cruiser-upper-control-arms","title":"08-21 Toyota Land Cruiser Upper Control Arms","description":"\u003cspan\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5''-3'' lift kits are installed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1'' of additional wheel droop travel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWill work with all aftermarket brand shocks.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOnly upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795065386,"sku":"87504","price":1064.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/200-series-land-cruiser-upper-control-arms-performance-uniball-uca.jpg?v=1749695991"},{"product_id":"03-09-lexus-gx470-10-21-gx460-upper-control-arms","title":"03-09 Lexus GX470\/ 10-21 GX460 Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5\" -3\" lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1\" of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWill work with all aftermarket brand shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOnly upper control arm on the market that allows a 3.0\" diameter coilover shock to be installed with no contact.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795229226,"sku":"96504","price":967.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/3rd-gen-toyota-tacoma-performance-upper-control-arms-uca-uniball-96504_742376c0-cf78-4203-ad6c-83a03a48c9f4.jpg?v=1749695989"},{"product_id":"21-23-ford-bronco-upper-control-arms","title":"21-23 Ford Bronco Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795294762,"sku":"80525","price":1147.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/new-6th-gen-ford-bronco-uniball-upper-control-arms.jpg?v=1749695987"},{"product_id":"21-23-ford-f-150-upper-control-arms","title":"21-23 Ford F-150 Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eUCA's are designed with added caster to aid in retaining factory alignment specs when aftermarket lift kits are installed. This reduces the darting or wandering in the vehicle's steering when 2.5''-3'' lift kits are installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUpper control arms combined with extended length coilover shocks will allow for up to 1'' of additional wheel droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce bushing deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for added component strength \u0026amp; maximum wheel travel. Drilling the lower taper of the spindle with a 9\/16\" drill bit for clearance is required to install the bolt. No irreversible changes are made for re-installing a ball joint.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTOTAL CHAOS includes 1\" I.D. uniballs that feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers maximize droop wheel travel and are machined from heat treated 17-4 stainless steel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot compatible with air ride or variable ride height models.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795622442,"sku":"80502","price":1158.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/2021-Current-Ford-F150-uniball-upper-control-arms-80502.jpg?v=1749695986"},{"product_id":"19-21-ford-ranger-upper-control-arms","title":"19-21 Ford Ranger Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe uniball cup placement is moved to correct the caster angle that is lost with aftermarket lift kits. Vehicles that have an increased ride height are harder to align. The added caster reduces the darting or wandering in the vehicles steering and helps retain the factory alignment specifications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long-lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eKit includes tapered spindle adapters for aluminum and steel spindles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e*These control arms will fit North American Ranger models only.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795753514,"sku":"80520","price":1050.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/ford-ranger-upper-control-arms-performance-uca.jpg?v=1749695984"},{"product_id":"10-14-ford-raptor-upper-control-arms","title":"10-14 Ford Raptor Upper Control Arms","description":"\u003cspan\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1\/2\" of additional wheel travel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*Not compatible with lift kits from RIZE Industries.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795819050,"sku":"80510","price":1050.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/1st-gen-ford-raptor-upper-control-arms-uniball-uca.jpg?v=1749695983"},{"product_id":"09-20-ford-f-150-upper-control-arms","title":"09-20 Ford F-150 Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1\" of additional wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e*Not compatible with lift kits from RIZE Industries.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570795851818,"sku":"80509","price":1050.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/ford-150-uniball-performance-upper-control-arms.jpg?v=1749695982"},{"product_id":"07-18-gm-1500-upper-control-arms","title":"07-18 GM 1500 Upper Control Arms","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long-lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ltwmotorsports.com\/pages\/which-control-arms-do-you-have\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.ltwmotorsports.com\/pages\/which-control-arms-do-you-have\"\u003eWhich OEM Control Arms do You Have?\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePart# 77500 is designed for vehicles with factory Cast Steel UCA's. Part# 77514 is for vehicles with factory Aluminum or Stamped Steel UCA's.\u003c\/span\u003e\u003c\/p\u003e","brand":"TOTAL CHAOS","offers":[{"title":"14-18 with OEM Cast Aluminum or Stamped Steel","offer_id":40570796015658,"sku":"77514","price":1064.56,"currency_code":"USD","in_stock":true},{"title":"07-18 with OEM Cast Steel","offer_id":40570796048426,"sku":"77500","price":1064.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/chevrolet-silverado-gmc-sierra-1500-upper-control-arms-uca-uniball.jpg?v=1749695979"},{"product_id":"15-21-colorado-canyon-upper-control-arms","title":"15-21 Colorado\/ Canyon Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long-lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDOES NOT FIT ZR2 MODELS\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796113962,"sku":"77504","price":1064.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/chevrolet-colorado-gmc-canyon-upper-control-arms-uniball-total-chaos.jpg?v=1749695978"},{"product_id":"07-18-tahoe-yukon-upper-control-arms","title":"07-18 Tahoe\/ Yukon Upper Control Arms","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long-lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.ltwmotorsports.com\/pages\/which-control-arms-do-you-have\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.ltwmotorsports.com\/pages\/which-control-arms-do-you-have\"\u003eWhich OEM Control Arms do You Have?\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePart# 77500 is designed for vehicles with factory Cast Steel UCA's. Part# 77514 is for vehicles with factory Aluminum or Stamped Steel UCA's.\u003c\/span\u003e\u003c\/p\u003e","brand":"TOTAL CHAOS","offers":[{"title":"14-18 with OEM Cast Aluminum or Stamped Steel","offer_id":40570796179498,"sku":"77514","price":1064.56,"currency_code":"USD","in_stock":true},{"title":"07-18 with OEM Cast Steel","offer_id":40570796212266,"sku":"77500","price":1064.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/chevrolet-silverado-gmc-sierra-1500-upper-control-arms-uca-uniball_fbcd7632-8326-462c-b9bb-beb7d6b268b2.jpg?v=1749695977"},{"product_id":"09-21-ram-1500-4wd-upper-control-arms","title":"09-21 RAM 1500 4WD Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1\" of additional wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot compatible with air ride or variable ride height models.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4WD only. Not compatible on 2WD models.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796277802,"sku":"81500","price":1050.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/dodge-ram-1500-upper-control-arms-uniball.jpg?v=1749695976"},{"product_id":"04-15-nissan-titan-upper-control-arms","title":"04-15 Nissan Titan Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1\" of additional wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned to maintain factory alignment specs on vehicles with 1.5\"-3\" lift kits.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe uniball cup placement is moved to correct the caster angle that is lost with aftermarket lift kits. Vehicles that have an increased ride height are harder to align. The added caster reduces the darting or wandering in the vehicles steering and helps retain the factory alignment specifications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796343338,"sku":"90500","price":958.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/1st-gen-nissan-titan-upper-control-arms-uca.jpg?v=1749695975"},{"product_id":"05-21-nissan-frontier-upper-control-arms","title":"05-21 Nissan Frontier Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1 3\/4\" of additional wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes urethane droop stop to prevent metal on metal contact between the arm and the coil bucket during droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe uniball cup placement is moved to correct the caster angle that is lost with aftermarket lift kits. Vehicles that have an increased ride height are harder to align. The added caster reduces the darting or wandering in the vehicles steering and helps retain the factory alignment specifications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796441642,"sku":"91500","price":1001.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/nissan-frontier-xterra-upper-control-arms-uca-uniball.jpg?v=1749695974"},{"product_id":"05-15-nissan-xterra-upper-control-arms","title":"05-15 Nissan Xterra Upper Control Arms","description":"\u003cspan data-mce-fragment=\"1\"\u003eTC upper control arms combined with extended length coil over shocks will allow for up to 1 3\/4\" of additional wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes urethane droop stop to prevent metal on metal contact between the arm and the coil bucket during droop travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly tubular upper control arms are 100% bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe uniball cup placement is moved to correct the caster angle that is lost with aftermarket lift kits. Vehicles that have an increased ride height are harder to align. The added caster reduces the darting or wandering in the vehicles steering and helps retain the factory alignment specifications.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\" I.D. uniballs feature a heat-treated stainless-steel ball \u0026amp; heat-treated stainless-steel race for maximum corrosion resistance and component longevity. These uniballs also feature a military grade PTFE woven fabric liner that helps prevent noise and reduce maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCNC tapered spindle adapters convert the factory ball joint to a 1\" uniball for easy installation.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCustom profile upper and lower hi-misalignment spacers are machined from 17-4 stainless-steel to maximize strength and wheel travel.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane bushings reduce deflection compared to stock rubber bushings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eControl arm pivots include zerk fittings to grease the bushings and inner sleeves without disassembly.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e3 stage powder coat process includes a durable clear coat to provide a long lasting finish.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete Grade 8 hardware kit is included.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796474410,"sku":"91500","price":1001.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/nissan-frontier-xterra-upper-control-arms-uca-uniball_5a183d0e-cde1-4157-99ee-5a2a4f96e25c.jpg?v=1749695973"},{"product_id":"16-22-toyota-tacoma-expedition-series-lower-control-arms-with-dual-shock-mounts","title":"16-22 Toyota Tacoma Expedition Series Lower Control Arms with Dual Shock Mounts","description":"\u003cspan data-mce-fragment=\"1\"\u003eLight weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBillet CNC machined uniball cup houses a 1\" 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIntegrated steering stop tabs retain factory turning angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tigher steering feel. Zerk fittings allow for easy maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStock length replacment lower A-arm dual shock capable.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSecondary shock mount tabs allow a bypass shock to be added for maximum tunability. Dual shock configurations will require TC shock hoop PT 86610.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOT COMPATIBLE with ICON S2 secondary shock system.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll dual shock lower control arms require a 1.25\" wheel spacer to keep the tire from hitting the second shock mount at full steering lock even if you do not have a secondary shock installed.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThree stage powder coat includes a durable clear coat.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796703786,"sku":"86555-E-16","price":2436.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/86555-E-16.jpg?v=1749695972"},{"product_id":"16-22-toyota-tacoma-expedition-series-lower-control-arms-with-single-shock-mount","title":"16-22 Toyota Tacoma Expedition Series Lower Control Arms with Single Shock Mount","description":"\u003cspan data-mce-fragment=\"1\"\u003eLight weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBillet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIntegrated steering stop tabs retain factory turning angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tigher steering feel. Zerk fittings allow for easy maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThree stage powder coat includes a durable clear coat.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796736554,"sku":"86555-E-16-NSS","price":2436.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/86555-E-16-NSS.jpg?v=1749695971"},{"product_id":"05-15-toyota-tacoma-expedition-series-lower-control-arms-with-single-shock-mount","title":"05-15 Toyota Tacoma Expedition Series Lower Control Arms with Single Shock Mount","description":"\u003cspan data-mce-fragment=\"1\"\u003eLight weight. Maximum ground clearance. Fully rebuildable. Bolt on.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePocket added at the coilover shock tabs maximizes clearance allowing for a wider range of shocks to be used - up to 3.0\". Will work with all brands of aftermarket shocks.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBillet CNC machined uniball cup houses a 1'' 100% stainless steel uniball that upgrades the factory ball joints for greater articulation and strength.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIntegrated steering stop tabs retain factory turning angles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUrethane pivot bushings reduce deflection compared to a rubber bushing offering a tigher steering feel. Zerk fittings allow for easy maintenance.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4130 chromoly laser cut plates are fully boxed and include internal gussets.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStock length replacement lower A-arm - SINGLE SHOCK ONLY.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThree stage powder coat includes a durable clear coat.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHand crafted in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOT COMPATIBLE WITH 4\"-7\" SPINDLE\/DROP BRACKET LIFTS.\u003c\/span\u003e","brand":"TOTAL CHAOS","offers":[{"title":"Default Title","offer_id":40570796867626,"sku":"86555-E-T-NSS","price":2436.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/files\/86555-E-16-NSS_e5e4df61-73f3-42ca-9faf-beef32a0f083.jpg?v=1749695968"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0554\/8916\/7402\/collections\/Untitled_design_55.png?v=1778098804","url":"https:\/\/www.ltwmotorsports.com\/collections\/control-arms.oembed","provider":"LTW Motorsports","version":"1.0","type":"link"}